Entering JobKeeper Payments in SapphireOne

Adjusting the JobKeeper Payment

JobKeeper is a wage subsidy scheme recently introduced by the Federal Government to support businesses in navigating the severe economic impacts caused by COVID-19. It is aimed at maintaining jobs for Australian employees, as well as at helping companies to restart their business quickly once the crisis has passed. We know that there is a lot to take in when it comes to JobKeeper. For this reason, SapphireOne is providing you with continuous support to simplify the process of implementing this new program by adjusting your Payroll/HR.

New information and updates regarding JobKeeper are being released on a constant basis. Therefore, we advise all our clients to read the below instructions, even if they have already successfully set up JobKeeper payments according to our previous blog SapphireOne is now JobKeeper Ready. This will enable you to ensure that your settings are adjusted correctly to comply with the ATO’s reporting guidelines.

JobKeeper Start and Finish Date

Employers are obliged to indicate any wage payments made to their eligible employees under the JobKeeper scheme via STP. Further, they need to notify the ATO of the start date of the first JobKeeper fortnight they are claiming reimbursement for. The failure to do so will result in forfeiture of the claim.

Correspondingly, employers are also held to update the ATO about any ceasing of JobKeeper payments that were previously made to eligible employees. As a result, we recommend to our clients not to enter a Finish date. (Please be aware that this recommendation may change in the future in the case that the Government releases any new information. We will keep you updated of any changes via our blog.)

If either the employee or employer becomes ineligible while the JobKeeper scheme is still in place, a Finish date will have to be added before the end of the last pay run. Reasons for ineligibility include, for example:

  • Receiving workers compensation payments
  • Receiving Parental Leave Pay
  • Receiving Dad and Partner Pay
  • Cessation of employment
  • Changes in the status of citizenship or visa

Update JobKeeper Payments in SapphireOne to comply with ATO guidelines

In case you have already set JobKeeper in SapphireOne, please follow the instructions below to adjust your settings to comply with the up-to-date reporting guidelines of the ATO.

1. Do not enter a JobKeeper 2020: Finish date.

JobKeeper Start and Finish date

2. In the JobKeeper Allowance setting, set the Multiplier as ‘1.00’.

Additionally, you will need to adjust this value in Working Transactions for every employee who is eligible for JobKeeper payments.

JobKeeper Allowance settings

Four Example Scenarios of Processing JobKeeper Payments

The below is an instruction on how to use SapphireOne’s JobKeeper Payment functionality in your pay run.

As the ATO has prescribed specific naming conventions for identifying various payments under the scheme, we advise our clients to use these in order to receive reimbursements without any unnecessary complications or delay. If you do not use the correct naming protocols, the STP will fail.

We have created 4 different scenarios to help guide you through the correct processing of JobKeeper payments.

Scenario 1: Employee Alex receives $2000 per fortnight

Alex gets paid gross $2000 per fortnight. This value exceeds the JOBKEEPER-TOPUP amount. As a result, you do not need to add any entry of JobKeeper Allowance in Working Transactions. As long as you have set a JobKeeper Start date, SapphireOne’s system will automatically notify the ATO regarding JobKeeper payment via STP.

JobKeeper setup for person gets $2000 per fortnight

Scenario 2: Employee Bruce Gets receives $500 per fortnight

Bruce gets paid gross $500 per fortnight. This value is less than the JOBKEEPER-TOPUP amount. As a result, you will need to set JOBKEEPER-TOPUP Allowance to ‘$1000’. This will ensure that Bruce receives the correct amount of gross $1500 per fortnight under the JobKeeper scheme.

JobKeeper setup for person gets $500 per fortnight

Scenario 3: Employee Chris is stood down and his normal working hours are 40 hours per fornight

Chris has been stood down, therefore his normal hours need to be entered at a Pay Rate of ‘0.00’. As a result, the system will accumulate leave for the 40 hours fortnightly he usually works. The value for JOBKEEPER-TOPUP Allowance needs to be set at $1500. This ensures Chris receives the JobKeeper payment.

If you encounter issues setting the Pay Rate at ‘0.00’, then enter ‘z’ as the Alt Rate before entering the Pay Rate.

JobKeeper payment person is stood down

Scenario 4: Employee David works in Payroll and previously made a JobKeeper payment not according to the guidelines

David already paid an employee a wage of gross $500 per fortnight. Instead of using ‘JobKeeper’ in accordance with the ATO’s prescribed naming conventions, he used ‘Bonus/Other’ in Working Transactions. To rectify this error and to be able to claim reimbursement, David has to create Working Transactions in the next pay run. There are two different methods available to him:

Scenario 4 – Method 1: David has to run two separate pay runs. The first one will adjust the prior wrong JobKeeper payment; the second one will pay the correct value.

Firstly, David needs to create a Working Transaction of two different types of Allowances for the employee. The JobKeeper payment needs to be entered as ‘+1000’ and the wrong Allowance as ‘-1000’.

Secondly, David has to follow the instructions of Scenario 2 above but only for the upcoming pay run.

JobKeeper Payment method 1 for adjusting wrong JobKeeper payment

Scenario 4 – Method II: David has to adjust the Working Transaction for the employee by adding the JobKeeper allowance in addition to the wrong allowance.

Firstly, David needs to create a Working Transaction of three different types of Allowances: The Normal Salary has to be entered as ‘+$500’, the Wrong Allowance as ‘-$1000’ and the JobKeeper Payment as ‘+$2000’.

This ensures that the employee is receiving a JobKeeper Payment of $1500 and it also corrects the wrong payment that was made previously.

Secondly, David has to use this new Working Transaction for the upcoming pay run.

JobKeeper Payment method 2 for adjusting wrong JobKeeper payment

Please book a support call via our website, in case you have any questions or need any further assistance.

SapphireOne is now JobKeeper ready

SapphireOne is now JobKeeper ready

The JobKeeper Payment is a wage subsidy made to eligible businesses, charities and not-for-profits affected by the Coronavirus to support them in retaining employees. Payments under this scheme are available from 30 March 2020 until 27 September 2020.

Employers that choose to participate in the scheme nominate all employees they are entitled to claim the subsidy for. It should be noted that this is an all in or all out optional decision for your eligible employees.

If you want to participate in the JobKeeper program, you can register your interest on the ATO’s website in order to receive updates and information on how and when to claim payments. It is advisable to enrol and pay your employees by 30 April 2020 in order to be eligible to claim the subsidy. However, if you need more time, you have until 30 May 2020 to enrol and nominate your employees.

Before you decide to process payments for JobKeeper in SapphireOne, you should understand the eligibility criteria, responsibilities of your company and payment information. Be aware that the ATO pays JobKeeper one month in arrears.

Eligibility criteria for JobKeeper Payment

In order to receive any payments under the JobKeeper scheme, both the employer and employee must meet all eligibility criteria.

For Employers:

Employers are eligible if they are businesses (including companies, partnerships, trusts and sole traders), not-for-profits and charities:

1. with a turnover of less than $1bn, if they have lost 30% or more of their revenue compared to a comparable period a year ago, or

2. with a turnover of $1bn or more, if they have seen at least a 50% reduction in revenue compared to a comparable period a year ago, and

3. there was at least one employee eligible on 1 March 2020, and

4. the eligible employees are currently still employed (including those who have been stood down or re-hired) during all relevant JobKeeper fortnights, and

5. the business is not listed in any of the ineligible categories

Example – Turnover test period

John runs a software company and he applies for the JobKeeper scheme during the first fortnight that the scheme started operating. This fortnight ends on 12 April 2020.

The turnover test period for John can be either:

• the month of March 2020 or April 2020, or

• the quarter from 1 April 2020 to 30 June 2020.

Example – Relevant comparison period

John identifies the relevant comparison period in 2019.

• For the month of April 2020, the relevant comparison period is April 2019.

• For the quarter of 1 April 2020 to 30 June 2020, the relevant comparison period is 1 April 2019 to 30 June 2019.

Read More from – https://www.ato.gov.au/general/jobkeeper-payment/employers/eligible-employers/

For Employees:

Employees are eligible if they are currently still employed and:

1. were employed by an eligible employer at 1 March 2020 (either full-time, part-time or fixed-term), or

2. were a long-term casual employee at 1 March 2020 (if they were employed on a regular and systematic basis for at least 12 months) and not working permanently for any other employer, and

3. were at least 18 years of age at 1 March 2020 (special rules for eligibility apply for younger employees), and

4. were an Australian resident (or if they are a holder of a Subclass 444 visa, were an Australian resident for tax purposes), and

5. did not receive either government parental leave, Dad and partner or worker compensation payments during the relevant JobKeeper fortnight.

Read More from –

Responsibility of employers and employees

Employers need to give each eligible employee a JobKeeper Employee Nomination notice, informing them on the intention to participate in the scheme and asking for their approval to be nominated and receive payments under the program. These forms should be kept as records, but do not need to be sent to the ATO.

The notice can be accessed via following link:

Additionally, the ATO requires companies participating in the JobKeeper scheme to make monthly declarations through the ATO’s business portal about their eligible employees and their turnover via STP and SBR2.

How much to pay

Every employer has to pay a minimum of gross $1,500 per fortnight to each eligible employee, withholding income tax as appropriate. If the wage paid to an employee exceeds this amount, the employer will regardless only be reimbursed for $1,500.

Employers are advised to pay their employees every fortnight under the JobKeeper scheme in order to maintain eligibility. The first fortnight runs from 30 March 2020 until 12 April 2020 and the last fortnight ends on 27 September 2020, respectively.

If an employee earns a wage of less than $1,500, their employer is only allowed to receive reimbursement under the JobKeeper program if they pay an according ‘top up’ in order to reach the value of gross $1,500 per fortnight. If the employer fails to pay this minimum amount to an eligible employee, he or she forfeits their claim under the subsidy scheme for the relevant fortnight.

All JobKeeper payments are considered assessable income of the eligible business. Further, the normal rules for tax deductibility apply in respect of the wages a company pays to its employees and for which they receive subsidies under the JobKeeper scheme. With regard to compulsory superannuation, the employer is not obligated to pay any super contributions for JobKeeper payments. Such payments are also not subject to GST. 

How to Process JobKeeper Payments in SapphireOne

There are 5 steps needed to Process Payroll within SapphireOne for JobKeeper Payments for first time. You can skip step 1 – 3 every following time you make a payment under the JobKeeper scheme.

Step 1: Create new Allowance record for JobKeeper.

Go to: Payroll > Administration > Allowance > Create New

The new Allowance has to have the name “JOBKEEPER-TOPUP”. Make sure the Payment Summary Names are set up between “Allowance A” to “Allowance J” and the Payment Summary / STP Position is set as “Other”.


Type ID – JK
Type – Before tax
Multiplier – 750 (Weekly) or 1500 (Fortnightly) or 3250 (Monthly)
Calc Method – Fixed amount, Allowance
Payment summary – Allowance A, other

How to Process JobKeeper Payments in SapphireOne

Step 2: Create start date for Job Keeper and leave finish date as 00/00/00

Go to: Payroll >Administration > Employee > Select Employee > Details – Controls > Job Keeper 2020

Create new Allowance record for JobKeeper

Step 3: Add JobKeeper name in Payment Summary

Go to: Utilities > control > Company > Modify Company > Details -Allowance > add JobKeeper in appropriate Allowance field.

Create start and finish date for Job Keeper

Step 4:Only apply the JobKeeper Wage Payment Item to your Employees who earned $1500 or less or who have been stood down

Go to: Payroll > Payroll > Working Transaction > Select Employee > Add JobKeeper in ‘Working Paysheet’ then click recalc button

Apply the JobKeeper Wage Payment Pay Item to your Employee

Step 5: Run Payrun to pay employees

Go to: Payroll > Payroll > Pay Run > Select Employee > Process

Once payment is done you can review the payslip.

Once the payment is made you can review the payslip. You will notice that this payment has been taxed and Superannuation has been added.

After completion of the payment process, you can submit your STP with the ATO using SapphireOne Single Touch Payroll.